-40%

Vintage Schwinn Bike LayBack SEAT POST Saddle Clamp Stingray Cruiser Bicycle BMX

$ 6.32

Availability: 11976 in stock
  • Material: Steel
  • Diameter: 20.7mm
  • Cruiser: Bike
  • For Bike Type: BMX Bike - Old School
  • Seatpost Type: LaidBack
  • Saddle: Clamp
  • Item must be returned within: 30 Days
  • Condition: New Quality Seat Post and Seat Clamps for Vintage Schwinns with Lots of Options to Choose From, Get out and Ride and Enjoy LuxLowBikes !
  • Refund will be given as: Money back or replacement (buyer's choice)
  • Brand: Lux Low
  • Krate: Stingray
  • Retro: Bicycle
  • Part Type: Seatpost
  • Vintage: Schwinn
  • All returns accepted: Returns Accepted
  • Seat: Post
  • Restocking Fee: No
  • Tank: Ballooner
  • Return shipping will be paid by: Seller
  • Middleweight: Lightweight
  • Type: Lay-Back
  • MPN: Does Not Apply
  • Color: Silver

    Description

    Vintage Schwinn Bicycle Lay-Back Seat Post and Seat Pan Clamp " Choice Options "
    This is your One Stop shopping for Vintage Schwinn Bike Replacement Lay-Back Seat Post and Seat Pan Clamps. Your Choice of Colors, Styles, and Combos from the pull down Menu. You are buying one part or combo, There is one shipping charge so the bigger the combo the better the savings, Plus minimal shipping increase for buying multiples. This is going read like a small book, but all the info is here for you to make a calculated precise decision. Read, Know your Options, Get what you Need, Be Happy, and Avoid Returns.
    Seatpost
    :   is a New Quality  Chrome Steel Lay-Back
    Vintage Schwinn Size 13/16" Diameter or or 20.7mm  Diameter Seat Post. The Seat post is approximately  14" over all length,  the tops
    ( your choice of 5/8" or 7/8" Top )
    is about 2" of the overall length. The Seat Post is more of a Lay-Back Reproduction of the Long Stingray Seat Post. Works  for Stingray Applications, and  other Vintage Schwinn Applications, Especially when you would like more length that the common 9" vintage Schwinn seat post. This Seat Post Fits most All Vintage Schwinn Bicycles from 1935 to 1980: Prewar and Postwar Balloon Tire Bikes like: Phantom, B-6, Hollywood, Panther, Hornet, Spitfire, DX, etc..., Middle Weights Bikes like: Corvette, Panther, Typhoon, Jaguar, Fleets, Fiestas, etc.., Stingray Bicycles like: Krate, Fast Backs, Deluxe, Junior, etc..., Light Weights like: Varsity, Suburban, Breeze etc... This Size is Common to Almost all Vintage Chicago Schwinns. This Post WILL NOT work with Schwinn Paramounts and Superior Bicycles, Schwinns with Lugged frames, Schwinns produced in any foreign land, and I am unsure about any Schwinn Reproductions or New Schwinn Bicycles. This Size was also used on some Non Schwinn Bicycles.
    Seat Post Tops OG 5/8" or 7/8":
    5/8" is the Original Vintage Schwinn Size Top, This top will work well for you if your Vintage Seat has a 5/8" clamp and still has good serrations to hold the seat pan clamp solid without movement. 5/8" is no longer supported and we do not have nor can get seat pan clamps in this size. 7/8" top this is a newer standard used on saddles made today, it is also the size of replacement clamps we can get to add new life to your old worn out Vintage Seats and Saddles. We offer the 7/8" top seatpost and Seat Pan Clamp combos as our one stop best suggestion to update your Vintage Schwinn Bicycle.
    Seat Post Style:
    The Seat post comes in  Lay-Back and Lay-Back Supported. The Lay-Back back supported will have more strength than unsupported. I do Not know why the support is the way it is but it is sturdier. The unsupported Lay-Back inserts lower than the supported because of no support. Use Common Sense with Lay-Back seat posts, You Probably want a longer or a lay back position because your bigger, Bigger means more weight and more leverage, and maybe you go off a curb and bam you get even more bend, Think about It. I am upward of 200 pounds and prefer Supported Only, although I have had no problems with unsupported, but most of my unsupported Lay-back seatpost use has been used with Banana Seats that had additional Sissy bar support.
    Flat Rail or Round Rail Seat Pan Clamps for use with 7/8" Top Seat post Only:
    The Flat Rail Clamp is common to a Vintage and New Cruiser / Comfort / up right seats & saddles. The Flat Rail Clamp is a replacement for Vintage Schwinn Seats and Saddles Like: Mesinger, Troxel, Person etc, they also can be used on some newer Cruiser Bike Seats.  The Flat Rail Clamp attaches to Flat Seat Rails that are around 7/8" wide and  approximately 1/8" thick. The Round Single Rail Clamp is  common  Vintage and New Road Bike Seats, Some Antique Leather Saddles, and Some Newer Cruiser Bike Seats. The Clamp attaches to round seat rails that around 7mm or 1/4" in Diameter.
    Always make sure the Seat Clamp is firmly tight and should not move before use. Seat Post should be inserted a minimum of 3", before use you should always inspect your bicycle for damage, don't force the post as your bike may have rust or a post stuck in it that needs to be cleared, use grease to protects from seizing and rust. I have supplied you extensive accurate info on this item, it is always recommended you measure your existing post to be sure and to have a good general knowledge of bicycle mechanics. Your Choice of Clamp Style and Color from the Menu.. Buy Multiples and Save on Big in shipping.
    If You Need a Different Seat or Size Seat post, Please Check out our ebay store for All our Cool Variations.
    This Part is a Nice Addition to your Authentic Antique Restoration, Krate Stingray, Vintage Ratty MC Rat Rod Monster Ride, or Custom Schwinn Chopper Bicycle Project.
    Happy Bidding!
    Be sure to Check out our other Auctions and Visit our ebay Store
    . Keep up to Date with our Freshly Listed Auctions and Product Sales by Subscribing to our ebay Newsletter. Buy Multiple  Items and Save on Shipping, Same Item: Instant Automatic Discount. Separate Items: Buy all you want From LuxLowbikes, Then Wait till we invoice you with the Discounted rate before paying. Rate Varies in relation to how the item ships. All International orders must have International shipping activated for combined shipping. I Prefer to Ship  Fed Ex Ground on Larger and USPS on Smaller Items. Shipping to Puerto Rico, Alaska, and Hawaii can be higher on large items. Pick up is Available in Golden Colorado on the Lux Low Ranch, Between Boulder and Denver, Colorado. Payment must be received with in 7 days of Auction end.
    If you have a problem with your order, We strongly suggest emailing us first for our best solution to the problem.
    We now offer FREE RETURNS filed within 30 days of Receipt. PLEASE NOTE: FREE RETURNS DOES NOT Mean Free of Responsibility. Free Returns means we will provide a return label or a Forward Working Solution should we make a mistake. Should you make a Mistake or a Hasty Purchase, without reading Our Extensive Item Descriptions, We Still Provide a Shipping Label but the Return Shipping Costs will be Your Responsibility and Come out of the Refund. Free Returns is a Stream Line ebay Return System for your convenience and the Party that makes the mistake takes care of shipping costs.  Please make Responsible Purchases, Read the info, Help us Cut  Down on Returns and Help Keep our Prices Low. Any Abuse of this System or Fraudulent Returns will be escalated to ebay.
    We Hope You Enjoy Bikes as Much as We Do, Check Out the new look of Lux Low our Ever Growing Bicycle Portfolio of Antique and Vintage Bicycles from 1890 to 1990.
    We Specialize in Full Antique Bicycle Restoration, Custom Chopper Bicycles, Antique Wood Wheel Safety Bicycles, Vintage Cruiser Patina Restores, and Vintage Road & Racing Bikes. We Excel in Patina Wood Wheel Restores: Miami, Racycle, Mead, Ranger, Dayton, Iver Johnson, Spalding, Pope, Columbia, Sterling, and Repainting Schwinn Krate, Stingrays and Ballooner Bikes, Prewar Elgin, Colson, Shelby, Dayton Huffman, Cleveland Welding, Hawthorne, Roadmaster, and Dope Azz Custom Bikes.